EeBGuide

Tag: Lifecycle stage: C (all modules)

  • 8.1 Overview

    —

    by

    Zsoka Gyetvai
    in

    This chapter addresses aspects that are related to life cycle stage C. All the aspects of this chapter provide provisions, rules and guidance for the goal and scope definition and the inventory analysis steps according to [ISO 14040] and [ISO 14044]. The following list describes the aspects addressed in Module C. 8      Aspects concerning Module…

  • C-01 End-of-waste status

    —

    by

    Zsoka Gyetvai
    in

    Aspect C-01 End-of-waste status Description Different countries define a waste’s end-of-waste status at different points in the waste treatment or recycling process. How should the end-of-waste state be defined? related study objective ☒ stand-alone LCA ☒ comparative assertion related study phase ☒ ☐ ☐ ☐ ☐ goal and scope definition inventory analysis (LCI) impact assessment…

  • C-02 End of life (EoL) scenarios

    —

    by

    Zsoka Gyetvai
    in

    Aspect C-02 End of life (EoL) scenarios Description In different countries, various options exist for the end of life of products and materials. Should general scenarios be defined for end-of-life routes? related study objective ☒ stand-alone LCA ☒ comparative assertion related study phase ☒ ☐ ☐ ☐ ☐ goal and scope definition inventory analysis (LCI)…

  • C-03 Choice of data

    —

    by

    Zsoka Gyetvai
    in

    Aspect C-03 Choice of data Description Should generic (material specific) or product-specific data be used? related study objective ☒ stand-alone LCA ☒ comparative assertion related study phase ☒ ☐ ☐ ☐ ☐ goal and scope definition inventory analysis (LCI) impact assessment (LCIA) interpretation reporting relevant for new buildings existing buildings construction products screening LCA simplified…

  • C-04 Waste classification

    —

    by

    Zsoka Gyetvai
    in

    Aspect C-04 Waste classification Description How should output wastes be classified: as e.g. inert, non-hazardous, hazardous? related study objective ☒ stand-alone LCA ☒ comparative assertion related study phase ☒ ☐ ☐ ☐ ☐ goal and scope definition inventory analysis (LCI) impact assessment (LCIA) interpretation reporting relevant for new buildings existing buildings construction products screening LCA…

  • 8.1. Overview

    —

    by

    Zsoka Gyetvai
    in ,

    This chapter addresses aspects that are related to life cycle stage C. All the aspects of this chapter provide provisions, rules and guidance for the goal and scope definition and the inventory analysis steps according to [ISO 14040] and [ISO 14044]. The following list describes the aspects addressed in Module C. 8.  Aspects concerning Module…

  • 8.2 Module C1 – Deconstruction, demolition stage

    —

    by

    Zsoka Gyetvai
    in ,

    8.2  Module C1 – Deconstruction, demolition stage. C-01 Demolition/deconstruction – screening and simplified LCA. C-02 Demolition/deconstruction – complete LCA.

  • C-01 Demolition/deconstruction – screening and simplified LCA

    —

    by

    Zsoka Gyetvai
    in ,

    Aspect C-01 Demolition/deconstruction – screening and simplified LCA Description The deconstruction and demolition stage involves quantification of the impact related to the end of life of the constructed system. For example, if it is a reinforced concrete building, deconstruction activity will consist mainly in separating the reinforcing steel from the concrete. During this operation, energy…

  • C-02 Demolition/deconstruction – complete LCA

    —

    by

    Zsoka Gyetvai
    in ,

    Aspect C-02 Demolition/deconstruction – complete LCA Description The deconstruction and demolition stage involves quantification of the impact related to the end of life of the constructed system. For example, if it is a reinforced concrete building, deconstruction activity will consist mainly in separating the reinforcing steel from the concrete. During this operation, energy is consumed,…

  • 8.2 Module C1 – De-construction, demolition stage

    —

    by

    Zsoka Gyetvai
    in

    No specific aspects are given for module C1 for products. Please refer to EN 15804 for information concerning this module.